Francois Mevs

The wheel has an encoder disc that has a small hole that the home sensor uses  to determine zone 1.  see the document below to see the correct orientation of the disc.         

The game uses the duration of the background audio file to determine the length of the game.  If the compact flash card data becomes corrupted the game can disengage the clutch before the guest has...

The clicker sensor reads the pins as the wheel slows down.  If the pins on the wheel have loosened it can cause the game to score incorrectly.  The movement of the pointer flag through the optic sh...

Please click here to download the latest manual and system schematic.   

When the game encounters an error the top row of clowns will turn red.  To determine the error on the game press the "UP" button located in the front center door when the game is in attract mode.  ...

When the game encounters an error the top row of clowns will turn red.  To determine the error on the game press the "UP" button located in the front center door when the game is in attract mode.  ...

If your ball gate  works for a period and stops or works once and stops the game is not seeing either the open sensor or the closed sensor for the ball gate.   When the game is first powered on the...

If the shelf reset motor is repeatedly lifting up and down an the snowmen are in the raised position the shelf position sensor could be causing the failure.  The PDF document contained in this arti...

The game has a passive infrared sensor (PIR sensor) located in the front of the game pointing at the clowns to detect people trying to climb in the game to cheat. When the sensor senses a change...

Check magnet under snowmen. Measure at main board J9 or J10 for 0v. Reference ground from black/white or black wire on J9 or J10. If 5v present, magnet is not engaging CG2012BLX sensor below snowme...