Francois Mevs

We recommend using 12 bags with the game do not use more or less. 

 Use a product like pledge on the playfield area and sides of the conveyor this will keep things sliding better, spray the pledge onto a cloth and wipe the surface down. 

The playfield has a large gear located on the bottom side which interfaces with a gear on the playfield motor to rotate the assembly.  Make sure the playfiled hasn't lifted and the gears are mated ...

The playfield has a large gear located on the bottom side which interfaces with a gear on the playfield motor to rotate the assembly.  The center shaft on the playfield passes through two bearings....

The Bean bag toss game has an error reporting system that checks the state of the sensor optics and the communication between the boards on power up.   If the game detects a problem it will display...

The conveyor belt on Bean Bag Toss has a safety sensor system to stop the belt if the area where the bags come out becomes blocked.  Check to make sure there is no dirt or debris on the sensors.  T...

Please click here to download the latest manual and system schematic. 

When adjusting the cheat sensor enter the programming menu by pressing the Diag button located in the center door, navigate to the tests menu and then select safety sensor test.  The screen will n...

Please click here to download the latest manual and system schematic. 

Whack a clown uses an amplifier to control the sound level of the game.  The amplifier is located in the back of the game in the lower door mounter to the right wall , turning the knob labeled volu...