Francois Mevs

The shooter assembly used in the All In game uses a pneumatic piston to translate the force of a players shot to propel the puck. The bleeder valve on the piston must be properly adjusted to ensure...

The All In game uses a laser mounted at the top of the playfield to read the position of the puck.  When the laser is out of alignment the game will generate an error 5. The file attached to this a...

Please click here to download the latest manual and system schematic.

Centipede Chaos ticket dispensers are controlled by the I/O board located in the back of the main cabinet, the replacement part number for the board is WE2034X.  The ticket run signal can be measur...

  The Impact brand monitor is a monitor we used during production of the Centipede Chaos game.  This monitor was encased in a large metal  housing and typically will have a model number sticker on ...

If you can hear your game playing but cannot see the video and you monitor is an LG monitor make sure it is set properly then try replacing the HDMI cable. If your monitor is an Impact monitor and ...

When installing a new LG monitor on your game you must set the TV up so that is powers on automatically and will display correctly.  See the attached setup sheet. 

When installing a new LG monitor on your game you must set the TV up so that is powers on automatically and will display correctly.  See the attached setup sheet. 

Please click here to download the latest manual and system schematic. 

The carnie on the top of the games arm is controlled by the reverse signal for the playfield motor.