David M. Bartel

It has come to our attention that some games manufactured after April, 2025 might contain defective puck ramps (SC1013).  If your game is experiencing an issue where the puck does not travel down t...

If you are experiencing pins that decide to travel up without anyone throwing a ball at it, see this document on what to look for.

Follow these instructions to replace your main board.

You can create your own SDCARD replacments for your game.  You must repalce with the same style SDCARD.  GEN users (non-NHL) cannot use NHL version SDCARDS.  NHL cannot use GEN versions.   All file...

It has been over three months since the release of our Neon Bowling game.  Our team has been hard at work making improvements and addressing any issues brought to our attention.  We have arranged t...

The game's clock needs to be set for the proper time in your location including the timezone.  The auto updater will fail to connect to the internet if the clock is not correctly set. You will need...

We have added a plastic guard to funnel liquid away from the main eletronics if liquid is spilled on the left podium.  The liquid will flow down to the floor of the podium and away from the eletroi...

The Notch line is active Low.  For a valid low pulse, voltage must be lower than .7 VDC and the high pulse should be 4.5 VDC.  The ticket run lin (or enable pulse) is active high which must be 5 VD...

The Notch line is active Low.  For a valid low pulse, voltage must be lower than .7 VDC and the high pulse should be 4.5 VDC.  The ticket run lin (or enable pulse) is active high which must be 5 VD...

The Notch line is active Low.  For a valid low pulse, voltage must be lower than .7 VDC and the high pulse should be 4.5 VDC.  The ticket run lin (or enable pulse) is active high which must be 5 VD...