To install the software for Monopoly Roll N Go you must use a program called RT flash creator this program is preloaded on the USB restore drive that came with your game, if you need to recreate the drive the latest version of the program can be located here. For assistance with the program installation see the installation instructions attached to this article.
To update an existing USB flash drive insert it into a computer navigate to the partition labeled "DATA" erase the current image on the drive and copy the new image to the data partition.
Both the standard version and the New Jersey version of the game software can be download from here.
After creating the USB flash drive, install the drive on any open USB port on the game's computer and a USB keyboard with the game powered down. When you power the game on, the computer should be set in the BIOS to boot the USB drive first. You should see a screen similar to below when booting the USB drive:
Pressing the enter key to select the version and then "Y" on the keyboard will begin the installation, once the installation is complete the game will notify you on the screen, power the game down, remove the USB drive and reboot the game.