The Deal or No Deal game has used two different versions of the computer throughout the course of its production.  The software used on the generations of computers is not interchangeable and will cause the game malfunction if installed on the wrong computer.   MicroTel Computers were the first generation of computer used in the game which have now been replaced with a Lenovo computer.  Please see the pictures of the different generations of computers and the steps to install the software below. 

MicroTel computers

Please click here to access the current version of the MicroTel software. 

The software is designed to be installed via DVD, if you do not have the ability to burn a DVD you can purchase disk with the software on it by ordering part number DN2090X. 

After completion of the download insert a blank DVD into your computer that you downloaded the image on, move the the downloaded image to the DVD drive directory and select "burn" from the top menu, once the burn process is done remove it from the computer. 

Power the Deal or No Deal game on then insert the DVD into the computer.  Once the disc has been inserted into the computer turn the game off wait approximately 30 seconds then turn the games' power back on, upon reboot the computer will boot from the DVD and begin the installation.  When the installation completes the game will eject the DVD and display a message on the screen stating if the installation was successful or failed and telling you to remove the disk from the game and reboot. 

If when rebooting the computer it does not load the disk make sure the BIOS settings in your computer are correct.  

Please Click here to access the latest software for the Lenovo computer. 

This version uses RT flash creator to create a bootable image on a USB drive.  Click here to download the latest version of RT flash see the instructions below for installation steps to create the drive.   Once the drive has been created insert it into one of the USB ports on the games computer and turn the game on.  Upon power up the computer should load the image that you created on the USB drive, then follow the onscreen instructions to complete the installation.  

If the game computer ignores the USB drive on power up make sure your BIOS is configured correctly.