Ice Ball Pro has a built in diagnostic mode to help you troubleshoot any issues you might encounter with the game. To enter diagnostic mode when the game is in the standby mode, pressing and holding down the Down arrow button wil lcause the game to enter a diagnostic mode. This mode will aid you in finding faults with your game. Refer to your game manual for detailed steps on how to access and replace sensors.
Once in the diagnostic mode, the game will play a sound file and display information on the status
of the buttons and score sensors.
The diagnostic will display any bad files found on the SDCARD with a letter, number, and or color.
If bad files exists, please contact ICE support for help in resolving any audio issues.
Score sensors can be tested by dropping a ball into each score hole. Test each by pressing each
button. The display will light a letter or number red when it detects a button press or a ball in a
score hole. See below for translation.
0 = 10 point sensor
1 = 40 point sensor
2 = right 100 point sensor
3 = N/A
4 = 20 point sensor
5 = N/A
6 = 30 point sensor
7 = N/A
8 = N/A
9 = Left 100 point sensor
A = player button
B = game button
C = up button
D = down button (it will always cause 0, 1, 2, 4, 6, and 9.)
E = Start
NOTE: Dropping a ball through 50 triggers 2 and 9.